# PO\_SolveAdjacency Use this command to split and match walls between rooms. If non-room geometries are selected, this command only splits for each subsurface. ## Options * **DoIntersect** Yes to perform geometry intersections. It will split faces. * **DoMatch** Yes to match energy and radiance properties of adjacent faces. * **CustomConstructions** Yes to select custom constructions to apply to adjacent faces. * **CustomModifiers** Yes to select custom modifiers to apply to adjacent faces. * **SetAirBoundary** Yes to apply air boundary to adjacent faces. Notes: * Apertures and doors will be adjusted to match new walls. * The boundary condition of the aperture or door won't be changed if its outdoor walls become indoor surfaces. ## Video Tutorials {% embed url="" %} Solve adjacency in a model {% endembed %} --- # Agent Instructions: Querying This Documentation If you need additional information that is not directly available in this page, you can query the documentation dynamically by asking a question. Perform an HTTP GET request on the current page URL with the `ask` query parameter: ``` GET https://docs.pollination.solutions/user-manual/rhino-plugin/pollination-commands/alphabetically/po_solveadjacency.md?ask= ``` The question should be specific, self-contained, and written in natural language. The response will contain a direct answer to the question and relevant excerpts and sources from the documentation. Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.